DpuScan
Scamax 2600 / 5000
Scanner Options
5.5 Defining
the
Rule
When defining a rule, the user must first determine the event and then which action shall result when
the event happens.
5.5.1 Counter
Handling
Illustration 14 – Reset Values?
on Page
shows the tab for counter handling. Depending on an
event, the four counters can be
Reset
to their initial start value.
After being Reset, the counters will be
increment
ed by a specified value, as seen in Chapter
How to Set and to Trigger Counters
Example 1:
If you want to start page counting after a chapter break with 2 (in order to, for example, insert a large
formatted leading page at a later time) you can specify that Counter A is reset to zero and then
incremented starting from two.
Example 2:
If you want to use only even numbers for page counting only, you cannot use Counter
A
because it is
incremented automatically by 1 from the second page on. Therefore, you must disable Counter
A
(set
its field width to zero) and use another counter for these pages (such as Counter B). Each time a level
0 (normal page) document was scanned, Counter B will be incremented by 2.
Page 38 of 42
