6
2-2 Motion to Zoom
The function of “Motion to Zoom” is zooming in the screen when there is any motion
occurring. After clicking
icon, it will activate the “Motion to Zoom “mode.
1. At first, you can go to “
Alarm Notice
” in
“System Setting”
menu to set up the cameras that
you want to enable the “Motion to Zoom” function and then return to the “
Main Menu
” to
click the “Motion to Zoom” icon.
2. When there is a motion occurring in the channel that is enabled the “Motion to Zoom”
function, the motion will be zoomed in the “Motion Zooming” area and the original area of this
channel will be replaced by a “
Motion Picture”
. If the motion occurs in the channel that is not
enabled the “Motion to Zoom” function, the screen of this channel will not have any reaction
and will not be marked in red frame.
3. The motion zooming in the “Motion Zooming Area” will be kept in three seconds and will
be replaced by a new motion happening after three seconds. If there are more than one new
Motion Zooming Area
Motion Picture
