10
3-5-1 The Backing Up Procedures
1.
Before you start to back up the video files, make sure that the back up program has
detected the IDE/SCSI burning devices. If not, please check if the device is installed
properly and click
to rescan the device. After that, the device still can not be
detected, please verify if the device is ok.
2.
Erase (Blank) the Disk
:
If CD-R/RW or DVD+R/RW or DVD-R/RW is used, the icon
will lighten after
you insert the disk to the recorder.
a. Click
on to start the erasing process.
b.
After it is done, the Message area will display “Done”.
3.
Select the files to back up
:
Expand the hard drive directories in the left of the screen. Drag the mouse to select the
recording files for backup (by Year, Month, Date) as shown in the following figure.
4.
Click
to move these files to the right side of the screen for burning to the burning
✍
If CD-R is used, you do not need to execute this process.
