JANDS
Revision 0 3
rd
December 2003
- 6 -
Operating Guide
EMC COMPLIANCE
This product is approved for use in Europe and Australia/New Zealand and conforms to the following
standards:
European Norms
Australian / New Zealand Standards
EN 55014
AS/NZS 1044
EN 50082-1
AS/NZS 4251.1
EN 60335-1
AS/NZS 3350.1
JANDS PTY LTD 2003
All rights reserved
DISCLAIMER
Information contained in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. JANDS P/L shall not be liable for any
loss or damage whatsoever arising from the use of information or any error contained in this
manual.
It is recommended that all service and repairs on this product be carried out by JANDS P/L
or authorised service agents.
JANDS
dimmers must only be used for the purpose they were intended by the
manufacturer and in conjunction with the operating manual.
JANDS P/L cannot accept any liability whatsoever for any loss or damage caused by
service, maintenance or repair by unauthorised personnel, or by use other than that intended
by the manufacturer.
Disconnect mains power when not in use.
Manufactured in China,
Designed in Australia by JANDS PTY LTD, ABN 45 001 187 837
Street Address
Mailing Address
Jands Pty. Ltd.
Jands Pty. Ltd.
40 Kent Rd
Locked Bag 15
Mascot NSW 2020
Mascot NSW 1460
Australia
Australia
PHONE:
+61-2-9582-0909
FAX:
+61-2-9582-0999
WEBSITE:
www.jands.com.au
Summary of Contents for 4PAK
Page 1: ......
