Hardware Notes
••••
115
Parallel Port
The Parallel port is used for connecting a parallel printer to the HOG. The connector is a 25 Pin female “D”
Sub-Connector and is wired as follows.
Pin 1
Strobe
Pin 2
D0
Pin 3
D1
Pin 4
D2
Pin 5
D3
Pin 6
D4
Pin 7
D5
Pin 8
D6
Pin 9
D7
Pin 10
ACK
Pin 11
BUSY
Pin 12
PAPER END
Pin 13
SELECT
Pin 14
AUTOFEED
Pin 15
ERROR
Pin 16
INIT
Pin 17
SELECT IN
Pin 18
Ground
Pin 19
Ground
Pin 20
Ground
Pin 21
Ground
Pin 22
Ground
Pin 23
Ground
Pin 24
Ground
Pin 25
Ground
VGA Port
The VGA port is used to connect a VGA monitor to the console. The connector is a 15 Pin High Density
female “D” Sub-Connector and is wired as follows.
Pin 1
Red
Pin 2
Green/Mono
Pin 3
Blue
Pin 4
Not Used
Pin 5
Not Used
Pin 6
Red Ground
Pin 7
Green Ground
Pin 8
Blue Ground
Pin 9
Not Used
Pin 10
Ground
Pin 11
Not Used
Summary of Contents for HOG 1000
