USG-00000-JLXLITEMKII [1.0]
JLX LITE MKII
12
4.1
Rated Capacity
The load limitations of the JLX-LITE-MkII is outlined in the following sections. Note that the limits indi-
cated apply to JLX-LITE-MkII that has been installed as per the instructions in this guide.
WARNING
NEVER
exceed the specified load rating
4.1.1
Definitions of Load
The "Working Load Limit" is the maximum overall load that the bar is permitted to carry. It is made up of
a combination of point loads and distributed loads.
4.1.2
Maximum Point Load
This is the maximum individual load that can be applied to a JLX-LITE-MkII. An example would be a
single light attached to the Bar.
Figure 4.1 –Point Load
In addition, the sum of all point loads between two bar hangers must not exceed the specified maxi-
mum.
4.1.3
Maximum Uniformly Distributed Load (UDL)
This is the maximum load that can be supported across a span of Bar. Include any point loads in the
calculation.
Figure 4.2 –Uniform Distributed Load (UDL)
1 metre
