COMPLIANCE
This product is approved for use in Australia/New Zealand
and conforms to the following standards.
Standards
AS/NZ 3100-2002 - Approval and test specification - General requirements for
electrical equipment
Disclaimer
Information contained in this user guide is subject to change without notice and
does not represent a commitment on the part of the vendor. JANDS Pty Ltd
shall not be liable for any loss or damage whatsoever arising from the use of
information or any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by
JANDS Pty Ltd or its authorised service agents.
JANDS Theatre equipment must only be used for the purpose they were
intended by the manufacturer and in conjunction with this user guide.
JANDS Pty Ltd will not accept any liability whatsoever for any loss or damage
caused by service, maintenance or repair by unauthorised personnel, or by use
other than that intended by the manufacturer.
Manufactured in Australia by
JANDS
PTY LTD ABN 45 001 187 837
Head Office: 40 Kent Road, Mascot NSW 2020. Sydney, Australia.
Postal Address: Locked Bag 15, Mascot NSW 1460. Sydney, Australia.
P
: (+61) 2 9582 0909
F
: (+61) 2 9582 0999
W
: www.jands.com.au
E
: info@jands.com.au
JANDS
PTY LTD 2015 All rights reserved.
Revision 1.0
3 March 2015
