background image

- 2 -

AMD Series                                                                                                    User's Manual

    4.5.6 Security Setting

   

This item allows you to 

Chage Supervisor/User Password,  Type the password, up to eight 

   characters, and press <Enter>. The password typed now will clear any previously entered 

   password from CMOS memory. You will be asked toconfirm the password. Type the password 

   again and press <Enter>. 

Note

:

Don’t forget your password. If you forget the password, you will have to 

open the computer case and clear all information in the CMOS before you can start 
up the system. But by doing this, you will have to reset all previously set options.

    4.5.7 Power Setting

BIOS SETUP UTILITY

Main

Advanced

Boot

Security

Power

JUSTw00T!

Exit

Security Settings

 Install or Change the
 password.

 

←          

Select Screen

  

↓     

Select Item

  

Enter  Change

  

F1     General Help

  

F10    Save and Exit

  

ESC    Exit

 

Supervisor Password : Not Installed
User Password       : Not Installed

 

 

Change Supervisor Password

Change User Password

BIOS Sector Virus Protection

[Disabled]

v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

Advanced

Boot

Security

Power

JUSTw00T!

Exit

Power Settings

 Section for Advanced

 APM Configuration.

  

←          

Select Screen

  

↓     

Select Item

  

Enter  Go to Sub Screen

  

F1     General Help

  

F10    Save and Exit

  

ESC    Exit

 

 

 APM Configuration   

        

 PC Health      

v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

 

 

APM Configuration

   Click <Enter> key to enter its submenu, APM Configuration Template Manager allows  

   you to manage Power Managerment default or custom configuration templates.

Summary of Contents for JW-A780LM-D2








































Reviews: