J&W JW-A780LM-D2, User Manual

- 2 -

AMD Series                                                                                                    User's Manual

BIOS SETUP UTILITY

Power

APM Configuration

 Enable/Disable SMI
 base power management
 and APM support.

←          

Select Screen

↑

↓     

Select Item

+-     Change Option

F1     General Help

F10    Save and Exit

ESC    Exit

Power Management/APM

Suspend Time OUT
Power Button Mode
Video Power Down Mode
Hard Disk Power Down Mode
Hard Disk Time Out(Minute)
PWRON After PWR-Fail
Resume By RTC Alarm
Keyboard WakeUp

Specific Key for PowerOn

Mouset WakeUp
Wake-UP by PME
USB Wakeup S3/S4

[Enabled]

[Disabled]
[On/Off]
[Suspend]
[suspend]
[Disabled]
[OFF]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]

v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

• 

Power Management/APM

   Enable or disable APM.

• 

Power Button Mode

   Select Power button functionality.

• 

Suspend Time OUT

If no activity during this time period,the BIOS will place the system into suspend low power

   state.

• 

Video Power Down Mode

  Optional:Disabled,Standby,suspend.

• 

Hard Disk Power Down Mode

  Optional:Disabled,Standby,suspend.

• 

Hard Disk Time Out(Minute)

  Optional:Disabled,1,2,3,4,5,6,7,8.

• 

PWRON After PWR-Fail

   This item selects the system action after an AC power failure.

[Off]: 

When power returns after an AC power failure, the system’s power remains off.

             You must press the Power button to power-on the system.

[On]:

 When power returns after an AC power failure, the system’s power will be powered on 

             automatically.

[Former-Sts]: 

When power returns after an AC power failure, the system will return to the

                          state where you left off before power failure occurred. If the system’s power 

                          is off when AC power failure occurs, it will remain off when power returns. If 

                          the system’s power is on when AC power failure occurs, the system will   

                          power-on when power returns.

• 

Resume By RTC Alarm

   When set to [Enabled], you can set the date and time you would like the Soft-Off PC to    

   power-on in the “RTC Alarm Date (Days)” and “System Time” items. However, if the system is    

   being accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and 

   time set in these items, the system will give priority to the incoming calls or network instead.

• 

Keyboard WakeUp

   Any key:Support "On/OFF" and "Suspend" for Power Button Mode.

• 

Specific Key for PowerOn

   When the Power On function is set to Password, use this item to set the password.

• 

Mouse WakeUp

   Optional:Disabled,Enabled.