The VAR SPEED PUMP menu is used to select the variable speed pump type (Jandy ePump™ DC, Jandy ePump™
AC, IntelliFlo
® 1
VF, IntelliFlo
®
VS, or IntelliPro
® 2
VS), and to select the various pump settings.
The user has the option to control one of four types of variable speed pumps, the Jandy ePump™ DC, Jandy ePump™
AC, the IntelliFlo
®
VF, or IntelliFlo
®
VS. To select a pump, highlight the desired model and press SELECT. An X
will appear next to the selection. To interface with the IntelliPro
®
VS 3050, select IntelliFlo
®
VS.
In SYSTEM SETUP menu, highlight VAR SPEED PUMP and press SELECT, highlight PUMP MODEL and press
SELECT. Use the UP/DOWN arrow keys to highlight the desired pump, then press SELECT.
The AquaLink
®
can control up to four (4) variable speed pumps. In the PUMP SETUP menu the user can select each
pump (1-4) and configure how the pump(s) are to be used. For example if the pump is to be used as a POOL PUMP,
SPA PUMP (dual equipment systems) or a FILTRATION pump (combo systems and pool/spa only systems), the
default setting is NOT INSTALLED. Or the pump can be configured as an aux pump, where it operates independently
from water filtration mode.
If the system is not going to control a variable speed pump then leave the application set to NOT INSTALLED. If
the system is going to control a variable speed pump, then you would set the application accordingly. In the example
below we are telling the system that it will be controlling one (1) variable speed pump.
In VSP SETTINGS menu, highlight PUMP APPLICATION and press SELECT, highlight PUMP1 and press
SELECT. Use the UP/DOWN arrow keys to highlight the item, then press SELECT. An X will appear next to the
selection.
