Page 13
4.7
Lockouts Menu
The LOCKOUTS menu prevents changes to specific AquaLink
®
RS operations.
When SYSTEM feature is on "LOCK", changes to program and system setup items are prevented.
When SPALINK RS and SPA SWITCH features are on "LOCK", all control from the SpaLink
®
RS and Spa Side
Switch are prevented.
When DEVICE feature is on "LOCK", the selected device will not activate either manually or by programming. This
feature can be used to prevent a heater from firing, or stop a fill line from adding water during the rainy months.
4.7.1
To use Lockouts
1.
Press the MENU button. Use the FOR WARD and BACK buttons to advance to the LOCKOUTS menu and
press ENTER. The AquaLink
®
RS display will read SYSTEM
<- ->*
.
2.
Use the arrow buttons to toggle between SYSTEM, SPA SWITCH, SPA LINK, and
DEVICE. Press ENTER
when the desired option is displayed.
3.
Use the arrow buttons to disable or enable the lockout of your choice. Press ENTER when you are done.
4.8
Program Group Menu
Program groups allow two different on/off times to be programmed for each piece of equipment. This is useful
for changing between specific settings for summer, winter, or vacation. The AquaLink
®
RS will store on/off times
for equipment in each group. Use the PROGRAM GROUP Menu to switch between PROGRAM GROUP A and
PROGRAM GROUP B. Group A is the default. Program Group A or B will not appear unless PROGRAM GROUP
has been selected. Confirm you are in the right Program Group before programming equipment.
4.8.1
To use Program Group
1.
Press the MENU button. Use the FORWARD and BACK buttons to move to the
PGM GROUP Menu and
press ENTER. The AquaLink
®
RS display will read PROGRAM GROUP A IS ACTIVE or PROGRAM
GROUP B IS ACTIVE.
2.
The AquaLink
®
RS display will read GROUP A
<—>*
or GROUP B
<—>*
. Use the FORWARD and
BACK arrow buttons to toggle between GROUP A and GROUP B. Press ENTER when the group you want is
displayed.
4.9
Display Light Menu
The
DISPLAY LIGHT menu
lets you turn the back light on and off on the AquaLink
®
RS Controller Display.
4.9.1
To turn the display light on and off
1.
Press the MENU button. Use the FORWARD and BACK buttons to move to the
DISPLAY LIGHT
Menu and
press ENTER. The AquaLink
®
RS display will read LIGHT ON/OFF
<—>*
.
2.
Use the FORWARD and BACK arrow buttons to toggle between on and off. When the option you want is
displayed, press ENTER.
4.6.2
To pause or stop Boost Pool
1.
Press the MENU button. Use the FORWARD or BACK buttons to move to the BOOST POOL Menu and
press ENTER.
2.
Use the FORWARD or BACK buttons to toggle between PAUSE, RESTART, and STOP. When the option
you want is displayed, press ENTER.
