background image

H041

1800 REV 

A

ENGLISH  

OWNER’S MANUAL

FOR YOUR SAFETY - This product must be installed and serviced by a contractor 
who  is  licensed  and  qualified  in  pool  equipment  by  the  jurisdiction  in  which  the 
product will be installed where such state or local requirements exist. The maintainer 
must be a professional with sufficient experience in pool equipment installation and 
maintenance so that all of the instructions in this manual can be followed exactly. 
Before installing this product, read and follow all warning notices and instructions 
that accompany this product. Failure to follow warning notices and instructions may 
result  in  property  damage,  personal  injury,  or  death.  Improper  installation  and/or 
operation will void the warranty.

Improper installation and/or operation can create unwanted electrical 
hazard which can cause serious injury, property damage, or death. 

ATTENTION  INSTALLER  -  This  manual  contains  important 
information about the installation, operation and safe use of this 
product.  This  information  should  be  given  to  the  owner/operator 
of this equipment.

 WARNING

Jandy Pro Series

Nicheless LED Underwater Light

Summary of Contents for Jandy Pro Series













Reviews: