Janfire
pelletswärme
swedish quality
7 Installation and place requirement
A separate central heating room is required for the installation of the Janfire Combiflame. The use of
this room should be only for heating. This room has to be conform to the local terms. The Combiflame
may not be installed in living space. The heating room has to be vented and lighted properly. Ask
your local authorities for permission before installation.
The assembly of the Combiflame has to be done by an expert.
Before setting the boiler into operation make sure that the installation is
state of the art and conform to all according laws. Make sure that all safety
installations are in place and belong to the state of the art and work
.
!
Ask local authorities before installation
.
The heating room has to be conform to the local fire protection requirements.
If a ventilating system is installed, make sure that there is a separate ventilation
for the boiler room. There may not be any under pressure in the boiler room
at any time.
The boiler room has to be protected against freezing. The basement has to be robust, fire-proofed
and plane. If you have any doubts, please ask an expert to check.
There has to be enough space around the boiler. At least 50 cm to any flammable material has to be
kept. Ask your local authorities.
i
We advise to isolate surrounding surfaces with mineral wool.
!
The heating room has to be conform with the local terms.
(1) pellet boiler Combiflame
(2) hose for pellets
(3) auger system
(4) pellet store
(5) storage of burner with level sensor
(6) pellet burner
1
4
3
2
5
6
