Installation Instructions Janfire Pellet Boiler Integral Typ 25
IA 32580002 EN_Ver5
Janfire 2014
4(25
)
Safety Information
1.1
General
The safety information is based on a risk analysis that has been undertaken in accordance with the directions
in relevant EU directives in order to meet the European
CE marking standards.
In practice, the pellet boiler does not carry any risks during operation.
Read through the safety instructions before commencing installation. Always follow the safety instructions
when you carry out installation and maintenance work. Follow the safety instructions on the warning labels!
Installation, operation, service and other procedures must only be carried out by trained and qualified
personnel and in accordance with applicable standards.
Note
Always follow these instructions during installation, operation and maintenance.
Note
For reasons of personal and operational safety: Use only spare parts that are manufactured
and approved by Janfire AB.
1.2
Conventions
The following conventions are used in these instructions:
•
DANGER!
The text DANGER! is used when there is a risk of personal injury or death.
•
WARNING!
The text WARNING! is used when there is a risk of damage to the product, the equipment, the control panel
etc.
•
CAUTION!
The text CAUTION! is used when there is a risk of system failure, interruption to operation, disruption etc.
The above warning texts are used in a hierarchical order. The text DANGER! also includes the possibility of
the occurrence of incidents that are represented by WARNING! or CAUTION!
1.3
Safety Instructions for Installation and Service
All electrical installation and servicing must be carried out by qualified personnel in accordance with
applicable standards and regulations.
All heating, ventilation and sanitation installation and servicing must be carried out by qualified personnel in
accordance with applicable standards and regulations.
All sweeping must be carried out by qualified personnel in accordance with applicable standards and
regulations.
DANGER
High Voltage
inside
this equipment
