4.
For (Mono) connection, connect the 1/4” mono male end of the cable to the
left mono output (L/MONO) located on the back panel of the digital instrument.
For (Stereo) connection, connect the two 1/4” male ends of the cable to the
left (L/MONO) and right (R) outputs located on the back panel of the
digital instrument.
6.
Power up the transmitter by pressing and holing the POWER button
for 2 seconds.
7.
Press and hold the Mode button until the Blue LED display
two fast flashes for stereo Line-in mode operations.
F
Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions
6.
Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively
the receiver can be placed on the next to the musical instrument.
F
Please proceed to page 28 for the receiver connection
TRANSMITTER CONNECTION
Wi-AudioLink
23
(L/MONO)
Digital Instrument
k
(R)
(Tx)
1/4” Stereo Y-Split to 1/8’
Stereo Cable
r
k
r
