Busbar tap-off unit
www.janitza.de
50
9.9
Handling batteries/accumulators
The following applies to the measurement devices
with batteries used in the busbar tap-off unit:
CAUTION
Risk of injury due to fire or burns!
The battery used in the device or its components
can cause fire or burns if used improperly.
·
Only replace the battery with the same type
or types recommended by Janitza!
·
Observe the polarity when installing the
battery!
·
Remove batteries only with non-conductive
tools (e.g. plastic tweezers)!
·
Do not recharge, disassemble, burn or heat
batteries above 100 °C (212 °F)!
·
Do not dispose of batteries with household
waste! Follow the disposal instructions in the
respective device documentation!
·
Keep batteries away from children and ani-
mals!
·
In case of damage, return devices with a sol-
dered battery to the manufacturer, observing
proper transport conditions!
