60
GridVis
®
Collector
www.janitza.de
www.janitza.de
GridVis
®
Collector
6. 4 Transferring a GridVis software project to the
GridVis
®
Collector
After the IP address configuration and the transfer of
the measurement devices via the GridVis software is
completed, the project can be transferred to the Grid-
Vis
®
Collector.
The project configuration is transferred via the USB
flash drive included in delivery (with NTFS formatting).
NOTE
The GridVis software stores data as of a plug-in
version > 1.1.11 or higher. A GridVis project can manage
several GridVis collectors. To retrieve stored data, select
the project and enter the collector ID.
The GridVis software creates a connection to the data-
base and to previously recorded GridVis Collector data
and automatically fills in the input fields (IP address,
port, etc.).
Step 1
· Insert the USB flash drive into the USB port of your
computer.
· In the “Collector configuration" window of your
GridVis software, in the "Export" area, use the
"Configuration stick" selection list to select the
directory of your USB flash drive.
· Click the "Write configuration" button.
Summary of Contents for GridVis Collector
