90
GridVis
®
Collector
www.janitza.de
www.janitza.de
GridVis
®
Collector
· On your computer, open the directory "(C:)\GridVis-
Data\config\Modules" and use "Ctrl + V" to paste
the file from the clipboard (press "Ctrl + V").
· Open the directory "GridVis Service Collector Data
Receiver" on the USB flash drive once again.
· From the "modules“ directory, copy the file "de-ja-
nitza-pasw-scripting-plug-in-gricoserverrecv.jar"
to the clipboard (mark file with a mouse click and
press "Ctrl + C").
· On your computer, open the directory "(C:)\GridVis-
Data\modules" and paste the file from the clipboard
(press "Ctrl + V").
Step 3
Make sure that the communication ports of the GridVis
®
Collector (in the "
Collector Configuration") window
and the GridVis software (in the
"Collector Receiver”
window)
match (see sections „6. 2 Configuring the
GridVis® Collector in the GridVis software“ on page
50 and „7. 4 Integrating plug-ins in the GridVis sys-
Then configure the communication port in the GridVis
system service:
· On your computer, open the directory "etc" in the
GridVisService directory "(C:)\Programs\GridVisSer-
vice\etc" (path may vary depending on the directory
structure of your computer!).
· Among other things, the "server.conf" file appears.
Summary of Contents for GridVis Collector
