84
PIN TUCKING
*
Refer to page 74 (Narrow Hemming) for thread
tension balance adjustment.
1 Pin tucking
Thread and Fabric
Fabric
Light to
Medium
Fabric
Needle thread on the
right
Upper looper thread
Lower looper thread
Synthetic : No. 60~80
Silk
: No. 50~80
Synthetic : No. 60~100
Silk
: No. 50~100
Thread
Machine Setting
1 Remove the needle on the left-hand side
2 Upper knife : Down
3 Lower looper pre-tension setting slider : STD
4 Changeable thread guide : 3/4
Sewing
Turn off the power switch.
Remove the needle on the left-hand side.
Deactivate the upper knife.
Turn on the power switch, then sew the folded edge while
guiding along the guide line.
1 Folded edge
2 Guide line on the needle plate
3 Right needle position line on the presser foot
4 Left needle position line on the presser foot
5 Right side of fabric
Open the fold flat and press the pin tucks to one side.
NOTE:
After you finish sewing,return the upper knife
to rhe original position.
6 Pin tucking
2
1
1
3
4
5
6
1
w
r
e
2
Summary of Contents for 1110DX -
Page 1: ...INSTRUCTION BOOK MANUAL DE INSTRUCCIONES LIVRET D INSTRUCTIONS MODEL MODELO MOD LE 1110DX...
Page 78: ...77 Blank page...
Page 96: ...95 Blank page...
Page 99: ...788 800 182...
