11
z
x
c
• Winding the bobbin
NOTE:
Set the speed control slider at its fastest position for
bobbin winding.
x
c v
b
q
m
z
Draw the thread from the spool.
x
Guide the thread around the thread guide.
NOTE:
For safety purposes, the machine will stop automatically
2 minutes after the start of bobbin winding.
c
Thread through the hole in the bobbin from the inside
to the outside.
v
Put the bobbin on the bobbin winder spindle.
b
Push the bobbin to the right.
The bobbin sign
q
appears on the LCD display.
n
With the free end of the thread held in your hand,
start the machine. Stop the machine when it has
wound a few layers, and then cut the thread close to
the hole in the bobbin.
n
m
Start the machine again. When the bobbin is fully
wound, it will stop automatically. Stop the machine
and return the bobbin winder to its original position by
moving the spindle to the left. Cut the thread as
shown.
Summary of Contents for 2030DC-T
Page 1: ...INSTRUCTION BOOK...
Page 44: ...808 800 202 t EN...
