33
x
c
i
o
v
!0
!1
b n
!2
m
Zipper Sewing (continued)
x
Attach the zipper foot with the pin on the right. Sew
through all the layers from the end of the zipper
opening, guiding the zipper teeth along the edge of
the foot.
c
Stop the machine 2
˝
(5 cm) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Open the zipper, then
lower the foot and stitch the remainder of the
seam.
i
Slider
o
2
˝
(5 cm)
v
Close the zipper and open the upper fabric flat over
the zipper. Baste the upper fabric and zipper tape
together.
!0
Basting stitch
b
Detach the foot and attach it with the pin on the
left. Backstitch across the end of opening 3/8
˝
(1 cm).
Turn the fabric 90 degrees and stitch through the
garment and zipper tape.
!1
Backstitch
n
Stop the machine 2
˝
(5 cm) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Remove the basting
stitches.
!2
Basting stitches
m
Open the zipper, then lower the foot and stitch the
remainder of the seam.
After finished sewing, remove the basting stitches on
the upper fabric.
Summary of Contents for 2030DC-T
Page 1: ...INSTRUCTION BOOK...
Page 44: ...808 800 202 t EN...
