AAASewing.com
15
1
●
Threading the Lower Looper
Open the looper cover and side cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
[1] Draw the thread through the right side thread
guide from back to front.
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
1
Thread guide
[2] Pass the thread through the holes on the right
side of the thread guide plate as illustrated.
2
Thread guide plate
[3] Pass the thread through the right side of the
looper thread guide, sliding the thread from left to
right.
3
Looper thread guide
[1]
[2]
[3]
1
2
3
4
5
6
7
8
9
10
11
2
3
(A)
(B)
Janome 204D Instruction Manual
Janome 204D serger
www.aaasewing.com
204D Owners Manual/ User Guide
