AAASewing.com
38
Replacing the Light Bulb
[1] Turn off the power switch and unplug the
machine.
[2] Loosen the face plate set screw, and remove the
face plate.
1
Face plate
2
Set screw
To remove:
Push and twist to the left.
To attach:
Push and twist to the right.
Reattach the face plate, and retighten the face plate
set screw.
3
Light bulb
4
To remove
5
To attach
Note:
* The machine is designed to use a 15 WATT
maximum light bulb.
* The light bulb will be HOT. Protect your fingers
when you handle it.
Cleaning the Feed Dog
[1] Turn off the power switch and unplug the
machine.
[2] Open the looper cover and side cover.
[3] Remove the needles and presser foot.
[4] Remove the needle plate set screw, and remove
the needle plate.
1
Needle plate
2
Needle plate set screw
[5] Brush out the lint around the feed dogs to the
front by using the lint brush or use a vacuum
cleaner.
[6] Reattach the needle plate, presser foot and
needles.
Close the looper cover and side cover.
1
Feed dog
[1, 2, 3, 4]
[5, 6]
1
2
3
4
5
2
1
1
Janome 204D Instruction Manual
Janome 204D serger
www.aaasewing.com
204D Owners Manual/ User Guide
