10
q
q
w
e
To Remove and Attach the Foot Holder
q
Thumb screw
w
Foot holder
e
Presser bar
• To remove
Remove the thumb screw
q
by turning it
counterclockwise with a screwdriver.
• To attach
Match the hole in the foot holder
w
with the
threaded hole in the presser bar
e
. Fit the
thumb screw
q
into the hole. Tighten the
screw
q
by turning it clockwise with screwdriver.
z
The drop feed lever is located in the hook
area.
Open the hook cover.
q
Hook cover
To Drop or Raise the Feed Dogs
x
To drop the feed dogs, press the lever in the
direction of the arrow, as illustrated.
w
Lever
c
To raise the feed dogs, push the lever in the
direction of the arrow, as illustrated, and turn
handwheel towards you. Feed dogs must be
up for normal sewing.
q
w
w
x
c
Changing Presser Foot
• To remove
Turn the handwheel toward you to raise the
needle to its highest position. Press the lever
q
on the back of the foot holder. The presser
foot will drop off.
• To attach
Place the presser foot so the pin
e
on the foot
lines up just under the groove
w
of the foot
holder. Lower the foot holder to lock the foot in
place.
q
Lever
w
Groove
e
Pin
q
w
e
