24
Blind Stitch Hemming
1
2
4
1
2
4
3
Pattern selector:
E or F
Presser foot:
Zigzag foot
Thread tension:
2–4
Stitch length:
1–3
Stitch width:
5
Hem guide
4
1
2
3
3
2
1
5
2
1
[A]
[B]
3
4
5
1
Fold up the hem and fold it back to from a 0.4 to 0.7cm
(1/4") allowance as illustrated.
1
2
3
4
5
Wrong side of the fabric
0.4 to 0.7 cm (1/4")
2
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw and
the shank of foot holder.
Tighten the screw making sure the wall of hem guide
is placed between the toes of the presser foot.
[A] Heavy weight fabrics (The raw edge should be
overcast.)
[B] Fine or medium weight fabrics
3
Raise the presser foot and place the fabric under the
foot so that the folded edge rests against the wall of
the hem guide.
Lower the foot, then stitch slowly for better control so
that the needle just pierces the folded edge when it
swings to the extreme left side.
Sew guiding the folded edge along the wall of the hem
guide.
Screw
Hem guide
4
Open the fold flat.
Right side of the fabric
*
If the needle drops far left, the stitches will show on the
right side of the fabric.
5
6
6
Summary of Contents for 419S
Page 1: ...Models 419S 423S...
Page 34: ...Printed in Taiwan 303 800 051...
