56
Drawn work uses the same method as fringing. Choose
a firm, woven fabric like linen where threads can be
removed easily.
z
Carefully cut the fabric on the grain. Determine the
width of the drawn work and remove one strand of
yarn or fabric thread at each end.
z
x
c
x
Sew down the left side, guiding the fabric so the right
hand stitches fall in open space. fter finishing the left
side, turn the fabric around 180°. Sew down the other
side.
c
Remove the yarn or fabric threads between the
stitching.
Drawn Work
q
Stitch pattern:
MODE 2:
37
w
Thread tension dial: 1 to 4
e
Presser foot:
Satin stitch foot F
4
w
e
q
You can make cross stitch designs with these patterns, in
half the time it would take if embroidered by hand.
Use a plain close woven fabric such as linen or wool
flannel. If you use light weight fabric, apply a tear away
backing for support.
Sew from the center of the design outward.
If you press the auto-lock button before sewing, the
machine will sew one unit of the cross stitch and stop
automatically.
q
Auto-lock button
Cross Stitch
q
Stitch pattern:
MODE 2:
90
w
Thread tension dial: 3 to 6
e
Presser foot:
Satin stitch foot F
Open toe satin stitch foot F2
* The stitch patterns 91-93 in mode 2 can also be used.
4
w
e
q
q
Summary of Contents for 4300QDC
