54
Applique
q
Stitch pattern:
MODE 2:
37
w
Thread tension dial:
1 to 4
e
Presser foot:
Satin stitch foot F
r
Presser foot pressure dial: 1 to 3
* The stitch patterns 38-53 in mode 2 can also be used.
Place an applique on the fabric and baste or pin it in place.
Lower the needle at the outer edge of the applique.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q
Applique
w
Outer edge
When turning a sharp corner, stop the machine with the
needle at the outer edge of the applique.
Raise the foot and pivot the fabric around the needle to
change the sewing direction.
• Adjusting the stitch width
Select pattern 37 in mode 2.
Press the “–” sign on the stitch width adjusting key
e
to
decrease the stitch width
t
.
Press the “+” sign on the stitch width adjusting key
e
to
increase the stitch width
y
.
e
Stitch width adjusting key
The stitch width will be varied based on the centered
needle drop position
r
.
(A) Stitch patterns 49-51 have a fixed left needle drop
position. When you change the stitch width, the right
needle drop position will change.
(B) Stitch patterns 37-40 have a fixed center needle drop
position. The stitch width changes symmetrically.
(C) Stitch patterns 41-48 and 52-53 have a fixed right
needle drop position. When you change the stitch width,
the left needle drop position will change.
(A)
(B)
t
y
r
(C)
4
w
e
q
r
q
w
e
Summary of Contents for 5270QDC
