57
Fagoting
q
Stitch pattern:
MODE 2:
69
w
Thread tension dial: 3 to 6
e
Presser foot:
Satin stitch foot F
* The stitch patterns 70, 77 in mode 2 and 31, 32 in mode
3 can also be used.
Use these stitches to join two pieces of fabric to create
an open work appearance and add design interest.
Fold under each fabric edge 5/8˝ (1.5 cm) and press.
Pin the two edges to paper or tear backing 1/8˝ (0.3–0.4
cm) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After sewing is finished, tear away the paper.
q
1/8˝ (0.3–0.4 cm)
w
Paper
4
q
w
e
q
w
w
e
q
French Knots and Candlewick Knots
q
Stitch pattern:
MODE 3:
01 - 04
w
Thread tension dial: 5 to 8
e
Presser foot:
Satin stitch foot F
Scallop Stitch
q
Stitch pattern:
MODE 2:
56
w
Thread tension dial: 3 to 6
e
Presser foot:
Zigzag foot A
* The stitch patterns 69 and 86 in mode 3 can also be
used.
4
q
w
e
Sew the stitches approximately 3/8˝ (1 cm) inside the
fabric edge.
Trim the outside of the stitches as shown. Make sure not
to cut the thread.
Select the stitch pattern 01 in mode 3 for French knots.
Select the stitch pattern 02-04 in mode 3 for Candlewick
knots.
Tighten the thread tension to 5-8 when sewing.
Summary of Contents for 5270QDC
