75
Warning Sign
Cause
Try this
1. The start/stop button is pressed with the foot control
connected.
2. The foot control is out of order.
(The foot control sign keeps blinking.)
Disconnect the foot control.
Contact the service center
or the store from whom the
machine was purchased.
1. The machine is started without lowering the presser
foot.
2. The machine will stop if the presser foot is raised while
sewing.
Lower the presser foot and
start the machine.
Lower the presser foot and
start the machine again.
The bobbin winder spindle is shifted to the right.
6KLIWWKHEREELQZLQGHU
spindle to the left for
stitching.
The machine will stop if the buttonhole is sewn without
lowering the buttonhole lever.
Lower the buttonhole lever
and start the machine again.
The twin needle key is pressed when a pattern unsuitable
for twin needle sewing has been selected.
6HOHFWWKHSDWWHUQVXLWDEOH
for twin needle sewing.
The twin needle key is pressed when the twin needle sign
is indicated on the LCD screen.
Replace the twin needle with
a single needle and press
the twin needle key.
The machine is started after halting due to overload.
Wait for at least 15 seconds
to restart. Remove tangled
threads around take-up lever,
hook race and automatic
thread cutting mechanism.
Do not lower the feed dog,
raise presser foot or shift
bobbin winder spindle while
the machine is running.
The machine does not work properly due to a problem in
the control circuit.
Contact the service center
or the store from whom the
machine was purchased.
Problems and Warning Signals
If a buzzer sounds and the LCD screen shows a warning sign, follow the guidance below.
(E1-E7)
Audible Signal
The Buzzer sounds when:
pip
Normal operation.
pip-pip-pip
Invalid operation or malfunction.
peep
E1-E7 error occurred.
pip pi-pi-pi-peep
Buttonhole is completed.
It is not abnormal that a faint humming sound comes out from inside the machine.
LCD display may get warm when the machine has been used for hours.
Summary of Contents for 5300QDC
