www.toews.com
4
For Your Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control when not
sewing.
Controlling Sewing Speed
Sewing speed is varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
Before Using Your Sewing Machine
Before using your sewing machine for the first time, place a
scrap of fabric under the presser foot and run the machine
with thread for a few minutes. Wipe away any oil which may
appear.
r
t
q
e
w
SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
q
Power switch
w
Machine plug
e
Machine socket
r
Power supply plug
t
Wall outlet
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
z
Turn the power switch off
q
.
x
Insert the machine plug
w
into the machine socket
e
.
c
Insert the power supply plug
r
into the wall outlet
t
.
v
Turn the power switch on
q
.
Operating Instructions:
The symbol "O" of a switch indicates the "off" position of
a switch.
For an appliance with a polarized plug (one blade wider
than the other):
To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
The foot controller Model YC-482J or TJC-150 is used
with this sewing machine (USA market only).
Janome 5812 Instruction Manual
www.toews.com
5812 Owners Manual/ User Guide