AcuFil Tips
Last Pattern
Due to the shifting of the fabric during the quilting process the design very
often will not fi t the fi nal space to be quilted.
1. Measure the height and width of the fi nal space to be quilted.
2. Open AcuFil Tool and select Adjust Last Pattern Size.
3. From the Open window locate the .jpx fi le created to quilt the project.
4. Enter the new measurement in the Editing Size pop up window, and then
click OK. The design will automatically resize to fi t the new measurement.
2. Enter in the size of the quilt block, keep in mind the maximum size of the
quilting area of the AQS22 hoop is 8.66 in/220mm.
3. Click Import Design to open a .jef,
.jef+, or .jpx design.
Navigate to the fi le the embroidery design
is saved in and open. It will automatically
be centered in the hoop.
Adding Quilting to an embroidered design
Quilting around an existing embroidery design is simple as 1-2-3.
1. Open the AcuFil Tool and select Edit Designs.
5. Print a new template and write the new
design to the machine or USB fl ash drive.
