13
Inserting the bobbin
z
Place the bobbin in the bobbin holder with the
thread running off counterclockwise.
q
Thread
w
Bobbin holder
x
Guide the thread into the notch on the front of the
bobbin holder.
e
Notch on the front
c
Draw the thread to the left, sliding it between
the tension spring blades.
r
Spring blades
v
Continue to draw the thread lightly until the thread
slips into the notch on the side.
t
Notch on the side
b
Pull out about 4" (10 cm) of thread to the rear.
Reattach the hook cover plate.
NOTE:
A threading chart is shown on the hook cover plate
for your reference.
y
Threading chart
q
w
e
r
t
y
z
x
c
v
b