53
Adjust key
Press the adjust key to open the manual setting window.
q
Adjust key
* You can make the same adjustments on the middle
touch screen.
w
Middle touch screen
You can adjust the following settings in this window.
e
Auto thread tension level
Press the “+” or “–” key to adjust the thread tension to
your preference.
r
Cutting the tails of jump threads
This option is can be used when the “jump thread cutting
length” setting or “cutting command” is activated (refer to
page 102).
Press the “+” or “–” key to adjust the tail length of jump
thread.
t
Embroidery foot height
Press one of the fabric icon keys (
y
or
u
) to select the
recommended height or press the “+” or “–” key to fine
tune the foot height.
Press the plain fabric key for fine fabrics (foot height
1.7 mm) .
Press the quilting key for quilts (foot height 2.2 mm)
y
Quilting key
u
Plain fabric key
To return to the default settings, press the default key.
i
Default key
q
NOTE:
• You can also change the setting with “+” or “–” key
and slider on the middle touch screen.
• You can also press the default key and the lockout
key on the middle touch screen.
i
Default key
o
Lockout key
w
u
i
y
e
r
t
y
i
e r t
u
o
