6
Presser Foot Lifter
The presser foot lifter raises and lowers the presser foot.
Raise the presser foot lifter before you thread the
machine.
You can raise the foot about 1.5 mm (1/16") higher than
the normal up position by exerting more pressure when
lifting the presser foot. This allows for changing the
needle plate and helps you to place layers of thick fabric.
Always lower the presser foot lifter when you start sewing.
q
Presser foot
w
Presser foot lifter
e
Normal up position
r
Extra lifted position
NOTE:
• The left needle may be slightly out from the bottom
of the presser foot when inserting heavy fabrics
under the presser foot.
Be sure to insert the fabric under the presser foot
while supporting both sides of the fabric around the
presser foot.
Same applies when sewing is finished in the middle of
heavy weight fabrics.
• Tension disks open and the thread tension will be
released when the presser foot lifter is raised.
t
Tension disks
Retractable Sewing Light
In addition to the twin LED lights, the machine is
equipped with a retractable light.
Place your finger in the groove and slide the arm towards
you. The light will turn on automatically.
q
Arm
w
Groove
Push back the arm to turn the light off and store it.
CAUTION:
Do not hit or exert excessive force on the arm of the
retractable sewing light as this may cause damage
when it is extended.
e
q
q
w
t
r
w
Summary of Contents for CoverPro 3000
Page 2: ...Instruction Book...
Page 25: ...22 Threading the Top Cover Stitch Guides and Spreader...
Page 48: ......
Page 49: ...778 800 055 EN...
