12
(2) Stitch width adjusting mode
The green light in the middle will light up.
The stitch width of the selected pattern will be
indicated.
To alter the stitch width, press the
key.
(3) Stitch length adjusting mode
The green light on the bottom will light up.
The stitch length of the selected pattern will be
indicated.
To alter the stitch length, press the
key.
t
Direct pattern selection
4 commonly used stitches can be selected by
pressing the button under the pattern icon.
r
Mode key
Each time you press this key the mode will change in
the following order:
(1) Pattern selection mode
The green light on the top will be on.
To select the pattern, press the key until the
pattern number of the desired stitch is indicated (see
the stitch chart below).
r
(1)
(2)
(3)
t
