30
5.0
2.2
1.0
Altering the needle drop position
The needle drop position of the following stitches can
be altered:
Press the mode key
to activate stitch width
adjustment (the middle green light lights up).
The preset value "3.5" will be indicated.
Press the plus (+) key to move the needle drop to the
right.
Press the minus (–) key to move the needle drop to
the left.
Altering the stitch length
The stitch length can be altered between 0.0 and 5.0.
Press the mode key
to activate stitch length
adjustment (the bottom green light lights up).
The preset value 2.2 will be indicated.
Press the plus (+) key to increase the stitch length.
Press the minus (–) key to decrease the stitch length.
* The reverse stitch length cannot be set longer than
2.5.
7.0
3.5
0.0
