22
Inserting the bobbin
z
Place the bobbin in the bobbin holder with the
thread running counter-clockwise.
q
End of the thread
w
Bobbin holder
q
w
e
t
r
t
y
u
z
x
c
v
b
b
Pull out about 10 cm (4") of thread and attach the
hook cover.
y
Bobbin thread
u
Align left edge of the hook cover.
v
Draw the thread to the back.
The bobbin should turn counterclockwise when
pulling the thread.
c
Continue to draw the thread lightly through the
tension blades until it slips into slot B.
r
Tension blades
t
Slot B
x
Guide the thread into slot A on the front side of the
bobbin holder. Draw the thread to the left
sliding it between the tension spring blades.
e
Slot A
