JanomeFlyer.com
19
Dropping or Raising the Feed Dog
The drop feed lever is located underneath the free arm
bed on the back of the machine.
q
To drop the feed dog, push the lever in the direction of
the arrow
q
. Set the stitch length value at “0.0”
e
.
w
To raise the feed dog, push the lever in the direction
of the arrow
w
, as illustrated, and turn the handwheel
r
toward you. The feed dog must be up for normal
sewing.
q
w
e
r
Correcting Distorted Stretch Stitch Patterns
The sewing results of the stretch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
If stretch patterns are distorted, correct them with the
feed adjusting screw.
q
Feed adjusting screw
•
Stretch stitch pattern (Example: stitch pattern 13)
If the pattern is compressed, turn the feed adjusting
screw in the direction of “+”.
If the pattern is drawn out, turn the feed adjusting
screw in the direction of “–”.
q
Elna Lotus Sewing Machine Instruction Manual
www.janomeflyer.com
Lotus Owners Manual/ User Guide