36
q
w
e
y
r
t
u
SECTION 4.
TAKING CARE OF YOUR MACHINE
Cleaning the Bobbin Case and the Hook
To dismantle shuttle race unit:
Raise the needle to its highest position and open
the hook cover.
Open the hinged latch of bobbin case and take it
out of the machine.
Open the hook race ring holders and remove the
shuttle race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry
cloth.
q
Bobbin case
w
Shuttle race ring holder
e
Shuttle race ring
r
Shuttle
t
Shuttle race
To assemble shuttle race unit:
Hold the shuttle by the center pin and fit it
carefully back into the shuttle race, forming a
perfect circle with the shuttle driver.
Attach the shuttle race ring making sure the
bottom pin fits into the notch.
Lock the shuttle race ring by turning the holders
back into position. Insert the bobbin case.
y
Pin
u
Notch
Cleaning the Feed Dog
Remove the needle and the presser foot.
Remove the needle plate setscrew and remove
the needle plate.
q
Setscrew
With a brush, clean out any dust and lint clogging
the feed dog teeth.
Reset the needle plate.
CAUTION:
Turn off the power switch and/or unplug the
machine before cleaning the feed dog.
q
CAUTION:
Turn off the power switch and/or unplug the
machine before dismantling the sewing machine.
Summary of Contents for G1206
Page 1: ...INSTRUCTION BOOK MANUAL DE INSTRUCCIONES MANUEL D INSTRUCTIONS...
Page 49: ......
Page 50: ......
Page 51: ......
