JanomeFlyer.com
8
Setting Spool Pins
The spool pins are used for holding the spools
of thread when feeding the thread to the ma-
chine.
Spool pins are separately packed to prevent any
damage in transit.
Therefore, fix the holder of spool pins in place with
a screwdriver, as shown in the figure.
Presser Foot Lifter
q
Presser foot lifter
w
Normal up position
e
Highest position
The presser foot lifter raises and lowers the
presser foot.
You can raise it about 1/4” (0.6 cm) higher than
the normal up position for easy removal of the
presser foot, or to help place heavy fabric under
the foot.
e
w
q
w
e
Thread Cutter
q
Thread cutter
You do not need a pair of scissors to cut threads
after sewing. Simply use the built-in thread
cutter.
q
Accessory Storage Box
Sewing accessories are conveniently located
under the extension table.
Janome HD 1000 Sewing Machine Instruction Manual
www.janomeflyer.com
HD1000 Owners Manual/ User Guide
