JanomeFlyer.com
14
Bobbin Winding
• Removing bobbin case
Remove the extension table from the machine
by pulling it to the left. Open the shuttle cover
q
by pulling down the embossed part on the
left of the cover.
Raise the needle to its highest position by
rotating the handwheel toward you.
q
Shuttle cover
w
Bobbin case
q
2
To remove the bobbin case
w
from the shuttle,
pull open the latch of the bobbin case. Pull the
bobbin case
w
straight out of the shuttle.
Changing Presser Foot
• To remove
Turn the handwheel toward you to raise the
needle to its highest position. Press the lever
q
on the back of the foot holder. The presser
foot will drop off.
• To attach
Place the presser foot so the pin
e
on the foot
lines just under the groove
w
of the foot
holder. Lower the foot holder to lock the foot in
place.
q
Lever
w
Groove
e
Pin
q
w
e
Janome HD 1000 Sewing Machine Instruction Manual
www.janomeflyer.com
HD1000 Owners Manual/ User Guide
