25
If the diameter of the button is more than 2.5 cm
(1˝), a buttonhole must be made manually as
follows:
z
Turn the handwheel toward you to raise
the needle to its highest position. Raise the
presser foot lifter.
x
Set the pattern indicator at “BH” by turning
the pattern selector dial.
c
Attach the transparent buttonhole foot B.
v
Pull the buttonhole lever downward as far as
it will go.
b
Lower the needle into the garment where the
buttonhole is to start, and lower the foot.
n
Sew the front bartack and left row, then stop
the machine after sewing the desired total
length of buttonhole.
m
Pull the buttonhole lever toward you.
,
Sew the back bartack and right row, then
stop the machine at the starting point.
To cut the opening and to reset for sewing
the next buttonhole, refer to the instructions
on page 24.
z
x
c
v
b
n
m
,
w
q
r
t
q
Pattern selector: BH
w
Presser foot: Transparent buttonhole foot B
e
Thread tension: 1–5
r
Stitch length: 0.5–1
t
Stitch width: 4–6.5
Manual Buttonhole
e
2
4
3
Summary of Contents for HD1800
