5
w
e
r
q
Connecting the Machine to the Power
Supply
z
Turn off the power switch.
x
Insert the machine plug into the machine
socket.
c
Insert the power supply plug into the outlet.
v
Turn on the power switch to activate the power
and sewing light.
q
Power supply plug*
w
Power switch
e
Outlet
r
Machine socket
t
Machine plug
* The power supply plug included may differ from
the illustration.
t
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the
faster the machine runs.
CAUTION:
Before connecting the power cord, make
sure the voltage and frequency shown on the
machine conform to your electrical power.
NOTE:
While in operation, always keep your eyes
on the sewing area, and do not touch any
moving parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
– when leaving the machine unattended.
– when attaching or removing parts.
– when clearning the machine.
Do not place anything on the foot control,
otherwise the machine will run inadvertently.
GETTING READY TO SEW
Summary of Contents for HD523
