72
Darning Stitch
Machine setting
q
Stitch pattern:
08
w
Needle thread tension: 3 to 6
e
Presser foot:
Automatic buttonhole foot: R
• To sew
z
Pull the button holder
q
to the back.
x
Place the garment under the foot. Press the needle
up/down button twice. Move the fabric to the
left to draw both threads under the foot.
c
Lower the foot and start the machine.
The machine will lock stitch, sew 16 rows of darning,
lock stitch again and stop automatically.
v
Turn the fabric and repeat sewing.
q
Button holder
w
Starting point
e
3/4˝ (2 cm)
r
9/32˝ (0.7 cm)
• To sew a shorter darning
To sew a darning shorter than 3/4˝ (2 cm), first stop the
machine after sewing the required length
y
, then press
the reverse stitch button
t
.
The required length
y
has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
t
Reverse stitch button
y
Required length
u
Starting point
• To sew a same-sized darning
Simply start the machine to sew another darning at the
same size.
• To sew the evenness of the darning
Correct the evenness of the darning as follows:
Press the cursor buttons to move the cursor under
the value “d5”
i
(default setting).
When the right side of the darn is lower than the left side,
press the button to set the value to “d6” – “d9”, and
make the darn even.
When the left side of the darn is lower than the right side,
press the button to set the value to “d1” – “d4”, and
make the darn even.
q
e
w
q
w
e
r
w
t
y
u
z
x
c
v
i
Summary of Contents for Hello Kitty 18750
Page 1: ...Instruction Manual Manual De Instrucciones Livre D Instructions...
Page 98: ......
Page 99: ......
