5
Presser Foot Lifter
The presser foot lifter raises and lowers your
presser foot.
You can raise it about 0.6 cm (1/4˝) higher than
the normal up position for easy removal of the
presser foot or to help you to place heavy fabric
under the foot.
q
Lowest position
w
Normal up position
e
Highest position
e
w
q
To Attach and Remove the Foot Holder
q
Thumb screw
w
Foot holder
e
Presser bar
• To remove
Remove the thumb screw
q
by turning it
counterclockwise with a screwdriver.
• To attach
Match the hole in the foot holder
w
with the
threaded hole in the presser bar
e
. Fit the
thumb screw
q
into the hole. Tighten the screw
q
by turning it clockwise with screwdriver.
q
q
w
e
Changing Presser Foot
q
Presser foot
w
Groove
e
Pin
q
e
w
• To remove
Turn the handwheel toward you to raise the
needle bar to its highest position.
Raise the presser foot.
Push the toe of the presser foot
q
to snap it off
the foot holder.
• To attach
Place the presser foot so that the pin
e
on the
foot lines up directly below the groove
w
of the
foot holder. Lower the foot holder to lock the foot
in place.
CAUTION:
When attaching or removing presser foot, turn
OFF the power switch.
