JanomeFlyer.com
104
Setting the Fabric in an Embroidery Hoop
Prepare a fabric and attach a stabilizer to the wrong side
of the fabric.
The fabric and stabilizer should be larger than the hoop
size.
Draw the centerlines on the fabric with tailor’s chalk.
q
Fabric
w
Centerlines
Lay the inner hoop and template on the fabric, matching
the centerlines of the fabric with the template.
e
Inner hoop
r
Template
Loosen the hoop tightening screw on the outer hoop.
Place the inner hoop and fabric on the outer hoop.
t
Hoop tightening screw
y
Outer hoop
Push the inner hoop and fabric into the outer hoop.
Tighten the screw on the outer hoop to stretch the fabric.
Make sure that the fabric is stretched drum-tight in the
hoop.
Remove the template.
NOTE:
Make sure to match the alignment marks of the outer and
inner hoops when stretching the fabric.
u
Alignment marks
Clamp the fabric to the hoop with the magnetic clamps
when using the hoop SQ23 or hoop GR.
i
Magnetic clamp
NOTE:
Thick layers of fabric and stabilizer may cause skipped
stitches, breaking threads or needle.
Avoid sewing on the layers thicker than 3 mm (1/8”).
q
w
r
e
t
y
u
i
Janome 12000 Sewing Machine Instruction Manual
www.janomeflyer.com
12000 Owners Manual/ User Guide
