JanomeFlyer.com
81
Applique
There are 6 types of applique stitches available in this
section.
The letter above the stitch image denotes the baseline of
the needle drop position.
M: Middle (center)
R: Right
The baseline can be adjusted without changing the stitch
width by pressing the “+” or “–” key on the bottom row.
Pivoting at applique corners
When sewing an applique with sharp corners, you may
turn on the “Foot up for pivoting” option so that the
presser foot automatically goes up when the machine
stops.
Press the foot-up key to turn on this option
q
Foot-up key
NOTE:
Make sure to stop the machine with the needle drops at
the outer edge of the applique.
Starting over from the corner
Press the startover key before sewing in the new
direction to sew from the beginning of the pattern.
w
Startover key
Two options of startover are available for applique
stitches. Press the cornering key to select normal
startover or cornering startover.
The key icon will change to show which option is being
selected when pressing the key.
e
Cornering key
Normal startover:
Sew a locking stitch then start sewing from the beginning
of the pattern.
Cornering startover:
Start sewing from the beginning of the pattern without a
locking stitch.
R
M
q
w
e
Janome 12000 Sewing Machine Instruction Manual
www.janomeflyer.com
12000 Owners Manual/ User Guide
