44
Sewing
z
Fold back the left seam allowance. Turn the right
seam allowance under to form a 0.2 to 0.3 cm (1/8“)
margin. Place the zipper teeth next to the fold and
pin in place.
Set the stitch length and thread tension back to the
original setting.
1 0.2 to 0.3 cm (1/8”) margin
2 Zipper teeth
3 Fold
4 End of the zipper opening
x
Attach zipper foot E with the pin on the right hand
side.
Lower the foot onto the topside at the end of the
zipper opening so that the needle pierces the fabric
next to the fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along
the side edge of the foot.
c
Sew through all layers next to the fold.
Stop 5 cm (2”) before zipper foot E reaches the slider
on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper to clear the slider.
Lower the foot and stitch the remainder of the seam.
5 Slider
6 5 cm (2”)
2
1
3
4
5
4
6
z
c
x
Summary of Contents for Horizon Memory craft 7700 QCP
Page 95: ......
