6
Connecting the Power Supply
z
First make sure the power switch
q
is off.
x
Insert the machine plug
w
of the power supply cord
into the machine socket
e
.
c
Insert the power supply plug
r
into the wall outlet
t
,
and turn the power switch
q
on.
q
Power switch
w
Machine plug
e
Machine socket
r
Power supply plug
t
Wall outlet
If you wish to use the foot control, insert the pin
connector into the jack on the machine.
z
First make sure the power switch
q
is off.
x
Insert the pin connector
w
into the jack
e
on the
machine.
c
Insert the machine plug
r
of the power supply cord
into the
machine socket
t
.
v
Insert the power supply plug
y
into the wall outlet
u
,
and turn the power switch on.
The foot control sign
i
will be displayed when the
foot control is connected to the machine.
q
Power switch
w
Pin connector
e
Jack
r
Machine plug
t
Machine socket
y
Power supply plug
u
Wall outlet
i
Foot control sign
NOTE:
The start/stop button does not work when the foot
control is connected.
e
w
q
z
c
r
t
GETTING READY TO SEW
z
v
q
e
w
r
y
u
NOTE:
Make sure to use the power supply cable that came
with the machine.
If you turn off the power switch, wait for 5 seconds
before turning it on again.
WARNING:
While in operation, always keep your eyes on the
sewing
area, and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control.
i
t
Operating Instructions:
The symbol “O” on a switch indicates the “off” position of
the switch.
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If it does not fit
fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
