48
Fagoting
q
Stitch pattern:
46
w
Thread tension dial: 3 to 6
e
Presser foot:
Satin stitch foot F
* The stitch patterns 14, 42, 43 and 62 can also be used.
Use these stitches to join two pieces of fabric to create
an open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear backing 0.3–0.4 cm
(1/8˝) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After sewing is finished, tear away the paper.
q
0.3–0.4 cm (1/8˝)
w
Paper
Select the stitch pattern 54.
Tighten the thread tension to 5-8 when sewing.
French Knots
q
Stitch pattern:
54
w
Thread tension dial: 5 to 8
e
Presser foot:
Satin stitch foot F
4
q
w
e
q
w
w
e
q
4
q
w
e
Scallop Stitch
q
Stitch pattern:
35
w
Thread tension dial: 3 to 6
e
Presser foot:
Zigzag foot A
* The stitch patterns 45 and 71 can also be used.
Sew the stitches approximately 1 cm (3/8˝) inside the
fabric edge.
Trim the outside of the stitches as shown. Make sure not
to cut the thread.
Summary of Contents for M100QDC
